New_Heading.jpg (14742 bytes)

• Large 10" x 54" table with 3 T-slots, 5/8", on 2.5" centers
    Table travel is 37.4". Leadscrew pitch is 5TPI with dials on each end graduated in .001".
• Large knee allows saddle to travel 16.5" for crossfeed with .001" dial graduations
• Large knee travel is 16.5" with 10TPI leadscrew, .001" dial graduations
• Large ram allows for over 18.5" of travel, inlaid scale, and deep throat for large workpieces
• Large SquareWays on Y and Z Axis…………. Double locks on all axis
• Aged stressed castings, stress relieved for long life and accuracy, Meehanite type
• Power quill feed allows for 0.0018, 0.003, 0.006 Inches of feed per revolution of spindle
• Hardened and ground and precisely scraped work table, saddle and knee ways, turcite B coated for wear resistance
• Centralized one-shot lubrication pump lubricates all way surfaces and leadscrews
• Backlash adjustment for leadscrews, Gib adjustments for ways
• Electrical cabinet with internal transformer for 110V and 24V devices, circuit breaker protected, Low Voltage controls, 24 volt halogen machine light.
    Transformer also includes power supply for digital readout and power table feed.
• Operator low voltage controls for coolant pump, machine light, main power with emergency stop button. Spindle off/forward/reverse switch.
• Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve, Installed and ready to use. Base chip pan to help prevent coolant overflow.
Schneider digital infinitely variable speed spindle drive, 5 Horsepower (4.0Kw) powers the 5 HP three phase induction spindle drive motor from 65 to 3750 RPM. Spindle      speed indicator on head shows RPM in direct drive and back gear. Spindle induction motor is finned for cooling and has 24 volt fan cooling system.
Sino three axis digital readout has 0.0002" resolution. Readout comes mounted to knee, table and cross and is ready to use.
    The readout is inch/metric switchable, with  absolute incremental function. 
    There is a calculator function, bolt hole pattern function, line pattern function, and arc calculate function.    
    A comprehensive manual is included.
• Power table feed is Align model AL500SP. Infinitely variable feed from .8 to 32 IPM with rapid button, on/off switch, and adjustable travel stops.
    This heavy duty power feed has 150 inch pounds of torque, with max to 650. Power table feed comes installed on machine, ready to use.
• Toolbox and tools, manuals, electrical drawing, test certificate all included.



Working Surface 10" x 54"
Longitudinal Travel 34.4" with powerfeed (37.4" without powerfeed)     (Powerfeed stops prevent overtravel.)
Cross Travel 16.5" (15.5" with readout installed)
Vertical Travel 16.5"
Ram Travel 18.5" with scale
Head tilt, left to right 90 degrees left, 90 degrees right with degree ring scale
Head Tilt, front to back 45 degrees front, 45 degrees back with degree ring scale
Ram Circular Movement 360 Degree with degree ring scale
T-Slots 3 @2 1/2" centers, 5/8" Ea.
Spindle Drive Yaskawa 4.0Kw (5 Horsepower) Variable frequency inverter
Spindle Range (Manual Vari-speed sheeve) 60-3750 RPM with frequency changer
Spindle Type R-8
Quill Travel & Diameter 5" travel and 3 3/8" diameter
Power quill feed range, Inches per rev 0.0018", 0.003", 0.006"
Weight ofWork Piece, max 660 lbs
Spindle Motor 5 HP, 208-240 volt, 3 phase induction drive spindle motor motor- standard
208-240 volts, 3 phase – standard
(For 440/460/480 Volt operation order transformer from option list.)
Machine, Net Weight 3400 lbs


Standard Configuration of KIT Machine: (All items already installed on machine!)
• Base Price of machine…F. O. B. Memphis, TN $   9,950.00 Part Number: 3VH-3
• Upgraded to 5HP Schneider electronic vari-speed spindle drive $   1,790.00 Part Number: VS-606V7
• Heavy duty power table feed on X axis $      630.00 Part Number: AL500SP
• Flood coolant pump, hose, nozzle $      450.00 Part Number FCKIT
• Chip pan $      195.00 Part Number CPKIT
• Machine light $      195.00 Part Number MLKIT
• Front and Rear way covers $        75.00 Part Number: FRWCKIT
• Three axis digital readout $   1,895.00 Part Number SINO3AX
Subtotal $ 15,180.00
Less package discount    - 1,190.00
TOTAL PRICE OF KIT………………F.O.B. Memphis, TN $ 13,990.00


Options you may wish to purchase: (All items will be installed on machine.)
• Transformer for 440/460/480 volt operation, mounted and wired $595.00 (3PHTRANS-K)
• Air Power Drawbar, pneumatic, installed 895.00 (PDB-PB001)
• Bestline Power Feed for Y-axis (cross feed) 730.00 (Y150-3V)
• Bestline Power Feed for Z-axis (knee feed) $795.00 (Z150-3V)
• Mill QC collet set, 1 holder R-8 to ER32, 1 spanner for collet nut,
    11 ER32 collets from 1/8" to ", all in form fitted case
$219.00 (R8ER32KIT-K)
• Clamp kit, 58 piece, bolts, nuts, step blocks, fingers, for fixturing $  69.00 (CK-K)
• Precision Parallel Set, several matched parallels in form case $149.00 (P100-K)
• Milling vise, 6" lock type $299.00 (6" VISE-K)
• R-8 collet set, 11 pieces $129.00 (R8-SET)


3EVH-5.jpg (42618 bytes)